Technical Data Decoboard Mfp Hybrid Im0031400

Extrait du fichier (au format texte) :

January 2024

Technical data

DecoBoard MFP Hybrid

Combination of particleboard (MFP) as middle layer and one high-density thin fibreboard (HDF) as top layer on each side with decorative melamine resin facing on both sides.
Applications
Furniture and interior fitting

Properties
Variety of decors and / or textures

Easy care

Antimicrobial

Food harmless

Low swelling / moisture resistant

Load bearing  particularly high bending strength

Certificates

Specification
Nominal thickness

Tolerance on thickness
Length- and width tolerance
Length- and width tolerance (precut panels)
Flatness
Edge damage
Edge damage (pre-cut panels)
Surface defects (Points)
Surface defects (Defect in the length)
Resistance to scratching
Resistance to staining
Resistance to cracking
Resistance to abrasion (plain colours)
Resistance to abrasion (printed designs)
Resistance to colour change in

Dans la boutique



Product Information Relevant Product Certificates For Buildi... Im0034060
Product Information Relevant Product Certificates For Buildi... Im0034060
16/08/2024 - www.pfleiderer.com
April 2024 RELEVANT PRODUCT CERTIFICATES FOR BUILDING CERTIFICATION (WITH MATRIX) TABLE OF CONTENTS 1. 2. 3. Building certifications p. 3-4 1.1. What is a building certification? p. 3 1.2. What building certifications are available? p. 3 1.3. What advantages do building certifications offer? p. 3 1.4. Which categories / criteria must be fulfilled? p. 4 DGNB p. 5-7 2.1. General information about DGNB p. 5 2.2. System description p. 5 2.3. Facts and Figures p. 5 2.4. Categories...

Technical Data Decoboard P2 F Microplus Im0029731
Technical Data Decoboard P2 F Microplus Im0029731
16/08/2024 - www.pfleiderer.com
May 2023 Technical data DecoBoard P2 F**** microPLUS® Emission-reduced chipboard, with decorative melamine resin facing on both sides and an antimicrobial and antiviral surface finish. Applications Furniture and interior fitting Properties Variety of decors and / or textures Easy care Antimicrobial Particularly low emission Certificates Specification Nominal thickness Tolerance on thickness Length- and width tolerance Length- and width tolerance (precut panels) Unit 10 16 18 19 25 mm ±0.3...

Product Information Resistance To Disinfectant Stain Resista... Im0034073
Product Information Resistance To Disinfectant Stain Resista... Im0034073
16/08/2024 - www.pfleiderer.com
April 2024 PRODUCT INFORMATION Resistance to disinfectant, stain resistance and chemical resistance of Duropal Laminates RESISTANCE TO DISINFECTANT Duropal laminates display high resistance to disinfectants. This permits a regular and thorough cleaning in accordance with applicable hygiene regulations. The ease-of-cleaning and good disinfectibility is favoured by the fact that laminate surfaces consist of thermosetting resin which form a stable, resistant and a material beyond reactivation. The surface...

Cleaning Recommendations Decorative Pfleiderer Products Im0029974
Cleaning Recommendations Decorative Pfleiderer Products Im0029974
16/08/2024 - www.pfleiderer.com
July 23 CLEANING RECOMMENDATION Decorative Pfleiderer products ð· FunXTional Products  Duropal XTreme, Duropal SolidColor XTreme, Duropal XTreme Touch, Duropal XTreme plus, PrimeBoard XTreme ð· Duropal HPL, Duropal SolidColor ð· Melamine faced boards are characterised by excellent material properties. They are durable, hygienic and easy to clean. The following recommendations serve as a guideline for proper cleaning with optimum care and cleaning effect in order to maintain the condition...

Technical Data Duropal Compact Worktop Black Core Im0030501
Technical Data Duropal Compact Worktop Black Core Im0030501
16/08/2024 - www.pfleiderer.com
September 2023 Technical data Duropal Compact Worktop, black core Compact high-pressure laminate with single or double-sided machined longitudinal edge in standard quality according to EN 438-4:CGS for use as a worktop. With uniform black-coloured core, single-sided decorative melamine resin surface and backing. Applications Furniture and interior fitting Properties Easy care Antimicrobial Food harmless Low swelling / moisture resistant High impact resistance Particularly low emission Certificates Specification Unit Nominal...

Product Information Cutting Decorative Pfleiderer Products Im0029828
Product Information Cutting Decorative Pfleiderer Products Im0029828
16/08/2024 - www.pfleiderer.com
May 23 PRODUCT INFORMATION Cutting decorative Pfleiderer products Factory Melamine faced boards Compact laminates HPL bonded boards Gütersloh, Leutkirch, Neumarkt Leutkirch Leutkirch min. 300 x 220 mm from full format: Leutkirch: 5,600 x 2,100 mm Gütersloh/Neumarkt: 5,310 x 2,100 mm Cutting Format Tolerances (length x width) Thickness Arnsberg (enquiries regarding cuts via SPR) Leutkirch only industrial rough cuts, no finished cuts (e.g. for edging / right-angled cutting) Cutting Cut...

Technical Data Decoboard P6 Plus Im0028835
Technical Data Decoboard P6 Plus Im0028835
16/08/2024 - www.pfleiderer.com
November 2022 Technical data DecoBoard P6 Plus Wood particleboard type P6 in accordance with EN 312, heavy-duty, for structural purposes for use in dry conditions, melamine faced on both sides. Applications Storage technology Properties Antimicrobial Food harmless Anti-slip surface Load bearing  particularly high bending strength Certificates Specification Unit Test standard Nominal thickness 38 mm Tolerance on thickness Length- and width tolerance Length- and width tolerance (precut...

Technical Data Decoboard P2 Im0028736
Technical Data Decoboard P2 Im0028736
16/08/2024 - www.pfleiderer.com
November 2022 Technical data DecoBoard P2 Urea resin bonded particleboard with decorative melamine facing on both sides, awarded with the Blue Angel. Applications Furniture and interior fitting Properties Variety of decors and / or textures Easy care Food harmless Particularly low emission Antimicrobial Certificates Specification Nominal thickness Unit 8 10 13 Length- and width tolerance Length- and width tolerance (precut panels) Flatness Edge damage Edge damage (pre-cut panels) Surface...
 

SunEwat XL d'AGC s'applique aussi en allèges !
SunEwat XL d'AGC s'applique aussi en allèges !
28/03/2014 - www.n-schilling.com
Communiqué de presse avril 2014 SunEwat XL d AGC s applique aussi en allèges ! SunEwat XL, le verre feuilleté d AGC intégrant des cellules photovoltaïques, a élargi le champ de ses possibilités : il peut non seulement être utilisé en vitrage de vision ou en zénithal mais aussi en allèges & de quoi renforcer plus encore la performance des bâtiments : un argument majeur face aux exigences actuelles... Pour tous les projets nécessitant des solutions BIPV (Building Integrated Photovoltaics)...

Tarif 2015 - revilox
Tarif 2015 - revilox
08/08/2017 - www.revilox.fr
Tarif 2015 LE BOIS DANS TOUS SES ETATS & Un Industriel français qui vous garantit la qualité, les prix et des délais courts 42 décors au choix pour laisser libre cours à votre imagination 2 Des fabrications « sur mesure » pour optimiser vos surfaces - Tarif 2015 - Edition N°1 SOMMAIRE Travailler  Organiser  Partager " " " " Bureaux DIVERSO Caissons Dessertes Comptoirs Tables de Réunion Ranger  Classer  Archiver " " " Pages 4-13 Pages 4 - 8 Page 9 Pages 10 - 11 Pages...

Menuiserie PVC ZENDOW - Huet
Menuiserie PVC ZENDOW - Huet
20/06/2018 - www.huet.fr
de nouvelles possibilités pour le pvc zendow S b y Y S T E M R d e c e u n i n c k   Plus de clarté, plus de confort, plus de sécurité, l esprit ZEN !   Sommaire zendow S b y Y S T E M R d e c e u n i n c k p4

68faf3 B7b8b21ca1ed45e5a7a50751ea4c43f8
68faf3 B7b8b21ca1ed45e5a7a50751ea4c43f8
22/07/2024 - www.trapex.com
TRAPEX R form following function Sliding Door Pulls Product Code 7015 75mm dia 75 54 7018 Leading edge pull 29.5 7018 Door leading edge pull 22 25.3 Finishes : SN trapex hardware ltd www.trapex.com : info@trapex.com +44 (0)1992 462150

Parts DRE UK
Parts DRE UK
19/06/2024 - aosmithinternational.com
Please check the serial number to determine the production date: Maintenance & Accessories 172406210302002 year week DRE + exploded view DRE before 01-04-'22 DRE parts no description 2 Therminal block Divider Security relais 3 Transformer 4 9 10 11 12 13 14 Fuse 250 V AC-T 200 mA Fuse 1A/250V Float valve Safety thermostat Switch Fuse 30A/600V Fuse 32A/400V Relais Thermostat Personnel protector Element Gasket for element Selenoide switch socket 15 Anode


24/10/2024 - www.cherubini.it
Résumé en cours de création pour ce fichier PDF