Sustainability Statement Blue Angel De Uz 76 Im0028010

Extrait du fichier (au format texte) :

SUSTAINABILITY STATEMENT 
BLUE ANGEL DE-UZ 76

Overview of Pfleiderer products with Blue Angel certification DE-UZ 76
Pfleiderer products listed in the overview fulfil the Blue Angel requirement
ð· compliance with the provisions of the European and German chemicals legislation
(REACH Regulation Annexes XIV and XVII; Persistent Organic Pollutant (POP) Regulation
Annex I; GefStoffV (Ordinance on Hazardous Substances); 25th BImSchV (25th Federal
Immission Protection Ordinance); CLP Regulation)
ð· of the legal origin of the timber in accordance with Regulation (EU) EUTR
ð· to the processed wood. For PEFC and FSC Mix labelled Pfleiderer products, 100 % of the wood from exemplary managed FSC as well as PEFC certified forests, reclaimed material and other controlled sources is used.

FSC®
(FSC C011773)

PEFC
(PEFC/04-32-0828)

ð· of a valid product-specific environmental product declaration (EPD) pursuant to DIN EN
15804
ð· for maintaining indoor air quality with regard to emissions of volatile organic compounds
(VOC)
Parameters

Requirement of DE-UZ 76 
final value 28th day

Pfleiderer Products with Blue Angel
 Certification DE-UZ 76

Total organic compounds  TVOC
Total organic compounds  TSVOC
Carcinogenic substances
Formaldehyde

"d 0.8 mg/m³
"d 0.1 mg/m³
"d 0.1 mg/m³
"d 80 µg/m³

complied with complied with unverifiably complied with

© Copyright 2022 Pfleiderer Deutschland GmbH
This information has been compiled with the greatest care. Nevertheless we can assume no liability for the correctness, compl eteness and up-to-dateness of this information.
Colour deviations caused by the printing technology are possible. In view of the ongoing further development and adaptation of our products, possible amendments to the

Dans la boutique



Technical Data Decoboard P4 Im0028817
Technical Data Decoboard P4 Im0028817
16/08/2024 - www.pfleiderer.com
November 2022 Technical data DecoBoard P4 Wood particleboard type P4 in accordance with EN 312, for structural purposes, for use in dry conditions, melamine faced on both sides. Applications Storage technology Properties Antimicrobial Food harmless Anti-slip surface Load-bearing Certificates Specification Nominal thickness Tolerance on thickness Length- and width tolerance Length- and width tolerance (precut panels) Flatness Edge damage Edge damage (pre-cut panels) Surface defects (Points) Surface...

Technical Data Duropal Compact Worktop Grey Core Im0030495
Technical Data Duropal Compact Worktop Grey Core Im0030495
16/08/2024 - www.pfleiderer.com
September 2023 Technical data Duropal Compact Worktop, grey core Compact high-pressure laminate with single or double-sided machined longitudinal edge in standard quality according to EN 438-9:BCS for use as a worktop. With uniform grey-coloured core, single-sided decorative melamine resin surface and backing. Applications Furniture and interior fitting Properties Easy care Antimicrobial Food harmless Low swelling / moisture resistant High impact resistance Particularly low emission Certificates Specification Unit Nominal...

Technical Data Decoboard P2 Microplus Im0029737
Technical Data Decoboard P2 Microplus Im0029737
16/08/2024 - www.pfleiderer.com
May 2023 Technical data DecoBoard P2 microPLUS® Urea resin bonded chipboard, with decorative melamine facing on both sides and an antimicrobial and antiviral surface finish. Applications Furniture and interior fitting Properties Variety of decors and / or textures Easy care Antimicrobial Certificates Specification Nominal thickness Unit 8 10 Pfleiderer Deutschland GmbH Ingolstädter Str. 51 92318 Neumarkt Germany 18 mm EN 14323 mm EN 14323 mm EN 14323 mm/m mm

Technical Data Decoboard Mdf.mr Im0028907
Technical Data Decoboard Mdf.mr Im0028907
16/08/2024 - www.pfleiderer.com
November 2022 Technical data DecoBoard MDF.MR Medium-density fibreboard with uniform construction, reduced swelling behaviour and decorative melamine resin facing on both sides (MR = Moisture Resistant = with improved swelling values for damp areas). Applications Furniture and interior fitting Properties Variety of decors and / or textures Easy care Food harmless Low swelling / moisture resistant Antimicrobial Certificates Specification Nominal thickness Tolerance on thickness Length-...

Technical Data Decoboard P2 Esa Im0028772
Technical Data Decoboard P2 Esa Im0028772
16/08/2024 - www.pfleiderer.com
November 2022 Technical data DecoBoard P2 ESA Electrostatically dissipative particleboard with decorative melamine resin facing on both faces. Applications Furniture and interior fitting Properties Easy care Electrostatically dissipative Certificates Specification Nominal thickness Tolerance on thickness Length- and width tolerance Length- and width tolerance (precut panels) Flatness Edge damage Edge damage (pre-cut panels) Surface defects (Points) Surface defects (Defect in the length) Resistance...

Technical Data Decoboard Individual Motiv P3 Im0028797
Technical Data Decoboard Individual Motiv P3 Im0028797
16/08/2024 - www.pfleiderer.com
November 2022 Technical data DecoBoard Individual Motiv P3 Particleboard with individual digital print motifs in direct facing method for damp areas. The front face is printed as required, the standard reverse is white. Applications Furniture and interior fitting Properties Individual printed motif Easy care Antimicrobial Food harmless Low swelling / moisture resistant Certificates Specification Nominal thickness Tolerance on thickness Length- and width tolerance Flatness Edge damage Surface...

Technical Data Decoboard P6 Im0028841
Technical Data Decoboard P6 Im0028841
16/08/2024 - www.pfleiderer.com
November 2022 Technical data DecoBoard P6 Wood particleboard type P6 in accordance with EN 312, heavy-duty, for structural purposes for use in dry conditions, melamine faced on both sides. Applications Storage technology Properties Antimicrobial Food harmless Anti-slip surface Load bearing  particularly high bending strength Certificates Specification Nominal thickness Tolerance on thickness Length- and width tolerance Length- and width tolerance (precut panels) Flatness Edge damage Edge...

Classification Report En 13501 1 B S1 D0 Im0027722
Classification Report En 13501 1 B S1 D0 Im0027722
16/08/2024 - www.pfleiderer.com
Prüfinstltul Hoch Lerchenweg I D-97650 Flodungen Iel.:09778-7 48G2cD hoch.flodunqen@tonline.de www.brondverhollen.de Fladungen Prüfinstiiut für dos Brondverholten von Bouprodukien, Dipl.-lng. (FH) Andreos Hoch Bououfsichtlich onerkonnie Prüf-, Überwochun gs- und Zertifizierungsstelle KB-Hoch-210121-3 KLASS!FIZI E RU N GSBERICHT Klassifizierung des Brandverhaltens nach EN 13501-1r) CLASS/FICATION REPORT Reaction to fire classification according to EN 13501-11) Auftraggeber Client Pfleiderer...
 

Especificaciones de la Niveladora
Especificaciones de la Niveladora
09/12/2014 - www.bobcat.eu
Niveladora hidráulica | Implementos Niveladora hidráulica | Especificaciones técnicas Características principales " La hoja dispone de un borde de ataque reversible que también puede ser fácilmente reemplazable. " Montado con Bob-Tach!". " La hoja se ajusta de forma lateral manualmente hasta 30 cm en cualquier sentido en el caso de la niveladora 84 e hidráulicamente 33 cm en cualquier sentido en el caso de la niveladora 96 y 108. " Paquete opcional de control por láser para un control...

xp_LOXAM_7140 Scie_circu_GKS_85_S mai 2007.qxp
xp_LOXAM_7140 Scie_circu_GKS_85_S mai 2007.qxp
22/02/2012 - www.loxam.fr
7140 CONTEXTE RÉGLEMENTAIRE Les règles et normes ci-après sont applicables dans le cas d'une utilisation normale du matériel : MANUTENTION - TRANSPORT · Utiliser la mallette prévue à cet effet pour ranger et transporter l'appareil. · Lors du transport en véhicule, caler la malette pour empêcher de rouler, glisser ou basculer. · Ne jamais lever ni déplacer la machine en tirant sur le câble d'alimentation. Consultez en complément la notice du constructeur · Directive machines suivant...

Système Powerbond
Système Powerbond
05/12/2014 - www.fischer.fr
CHARGES Scellement par injection Powerbond avec tige ûletée FIS A (classe de résistance 8.8) Charges admissibles max. pour un ancrage simple1) 6) dans du béton C20/254) Pour le dimensionnement, il convient de respecter l ensemble de l'agrément ETA - 12/0160. Type Powerbond M10 (8.8) Powerbond M12 (8.8) Powerbond M16 (8.8) 1) 2) 3) Béton ûssuré Profondeur Profondeur Épaisseur Couple de Traction Cisaille- Entraxe d'ancrage d'ancrage min. du serrage admissible ment min. eûective eûective...

05 01unternehmensportrait
05 01unternehmensportrait
09/04/2011 - www.iku-windows.com
www.iku-windows.com UNTERNEHMENSPORTRAIT Eine Familie mit Visionen Monika Thurnher, die Tochter des Erfinders Julius Thurnher, leitet die iku® intelligente Fenstersysteme AG, die für die Vermarktung und den Vertrieb der Markenprodukte iku®windows im Jahr 1999 gegründet wurde. Das Familienunternehmen mit Sitz in Wien will weltweit Partnerunternehmen als Lizenznehmer für iku®windows gewinnen. Neben technischem Know-how gibt die intelligente Fenstersysteme AG ein konsequentes Corporate-Design-Konzept...

Poutre en béton précontraint - ACOB
Poutre en béton précontraint - ACOB
15/03/2018 - www.eurobeton.fr
F ICHE DE D ÉCLARATION E NVIRONNEMENTALE ET S ANITAIRE Poutre en béton précontraint conforme à la norme NF P 01-010 Fédération de l'Industrie du Béton ISSN 0249-6224 ISBN 2-85755-170-3 ND/JRO EN 006 / Santé - Environnement Fiche de déclaration environnementale et sanitaire Poutre en béton précontraint conforme à la norme NF P 01-010 Réf. 41.E décembre 2005 par Nicolas DECOUSSER Jérôme DANIS Document élaboré sur la base de la fiche de déclaration AIMCC Avertissement La...


28/09/2024 - www.vescom.com
Résumé en cours de création pour ce fichier PDF