Angst+Pfister%20Group%20Code%20of%20Coduct%20for%20Suppy%20Partners En

Extrait du fichier (au format texte) :

Angst+Pfister Group
Code of Conduct for Supply Partners

1

Purpose
At the Angst+Pfister Group, building a sustainable future implies strong relationships with our partners. These relationships based on trust and loyalty are core of our values and lead to a joint success. We believe that our commitment towards an accountable conduct of business goes hand in hand with realizing our vision - being a partner for outstanding product and material expertise, engineering and supply chain excellence - and results in our success. Our supply partners are therefore thoroughly selected based on our supply chain strategy and values.
We are committed to comply with all applicable laws and regulations, to foster fairness and inclusion, fair competition and to take on social and environmental responsibility.
The Angst+Pfister Group Code of Conduct for Supply Partners is a minimum requirement from our side to all our supply partners and their sub-supply partners, based on standards of:
"
"
"
"

United Nations' Universal Declaration of Human Rights
United Nations' Convention on the Rights of the Child
ILO (International Labour Organization) Fundamental Principles and Rights at Work
International Chamber of Commerce's (ICC) Business Charter for Sustainable
Development

Being part of the Angst+Pfister Family
As a supply partner of the Angst+Pfister Group, you can expect to have a longterm, reliable partner who complies with the same requirements as imposed upon you as supply partner and who respects clear and mutually agreed commercial terms. The purpose of this Code of Conduct for Supply Partners is to clearly communicate our position, our expectations towards supply partners and in case of a supply partner assessment, to share the results as well as proposed actions for improvement.

Our Principles
Supply partners of the Angst+Pfister Group are required to conduct their business in compliance with all applicable laws and regulations, to take on social and environmental responsibility and to seek for a fair and robust business environment. The below principles are to be followed without exceptions and include full responsibility for own supply partners, sub-supply partners, as well as own employees, including freelancers.
1. Compliance with Laws and Regulationsÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿý1
2. Anti-Corruption and Business Integrityÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿý1
3. Fair Competitionÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿý2
4. Health & Safetyÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿý3
5. Trust & Respectÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿý4
6. Environmental Responsibilityÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿý4
7. Information & Data Security ÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿýÿý5

1. Compliance with Laws and
Regulations
The supply partner shall fully comply with all national and international legal

Dans la boutique



Datenblatt miCAN PB
Datenblatt miCAN PB
10/01/2011 - www.angst-pfister.com
miCAN2-PB Kommunikationsmodul PROFIBUS DP PROFIBUS zu CAN Gateway PROFIBUS galvanisch getrennt CAN galvanisch getrennt die Befestigung der Elektronik kann über eine Huttrageschiene (35 mm) oder Befestigungsklipps erfolgen · sehr gutes Preis / Leistungsverhältnis miControl Pin assignment / Anschlussbelegung ® · · · · · Weitere technische Daten sowie Informationen zur Anschlussbelegung finden Sie in der Betriebsanleitung bei www.miControl.de Pin assignment / Pinbelegung X1.1 X1.2 X1.3...

Datenblatt mcDSA E2
Datenblatt mcDSA E2
10/01/2011 - www.angst-pfister.com
mcDSA-E2 Motion Control · Very compact 4-quadrant controller to control brush-type, brushless DC-motors and linear motors miControl Antriebsregler · Sehr kompakter 4-Quadranten-Regler zur Ansteuerung von bürstenlosen, bürstenbehafteten DC-Motoren und Linearmotoren ® Pin assignment / Anschlussbelegung · · · · · Freely programmable with integral Motion Process Unit (MPU2) CAN interface (DSP402, protocoll DS301) The controller has over-voltage, low-voltage and overtemperature monitoring...

2023 Sustainability Report
2023 Sustainability Report
14/07/2024 - www.angst-pfister.com
SUSTAINABILITY REPORT 2023 ANGST+PFISTER GROUP Angst+Pfister Group - Sustainability Report 2023 Your Innovation Development Partner Angst+Pfister Group, headquartered in Zurich, is a globally operating enterprise with wholly owned subsidiaries and presence across Europe, Asia and the US, that engineers and produces innovative industrial components. Angst+Pfister continuously develops components based on innovation along the value chain, from material design and compounding, to engineering,...

DokumenteDownload (cs)
DokumenteDownload (cs)
10/01/2011 - www.angst-pfister.com
APSOplast®  moderní Yeaení v oblasti umlých hmot Bernhard von Allmen, vedoucí technik Dnes ji~ prakticky neexistuje oblast, ve které by se nepou~ívaly umlé hmoty. Vzhledem k vynikajícím vlastnostem jsou tyto materiály dnes neodmysliteln spjaty s moderní technikou. Spole nost Angst + Pfister nedávno doplnila svoj ji~ tak rozsáhlý sortiment o dalaí technické, vysoce výkonné termoplasty. Pod novou registrovanou obchodní zna kou APSOplast® pYedstavuje spole nost Angst...

Datenblatt mcDSA E5
Datenblatt mcDSA E5
10/01/2011 - www.angst-pfister.com
mcDSA-E5 Motion Control · Very compact 4-quadrant controller to control brush-type, brushless DC-motors and linear motors miControl® Antriebsregler · Sehr kompakter 4-Quadranten-Regler zur Ansteuerung von bürstenlosen, bürstenbehafteten DC-Motoren und Linearmotoren Pin assignment / Pinbelegung · · · · · freely programmable with integral Motion Process Unit. (MPU2) CAN interface (DSP402, DS301) The controller has over-voltage, low-voltage and over-temperature monitoring The controller...

Angst+Pfister%20Group Human%20Rights%20Policy En
Angst+Pfister%20Group Human%20Rights%20Policy En
14/07/2024 - www.angst-pfister.com
Angst+Pfister Group Human Rights Policy Dear Colleagues, dear Partners, The culture of the Angst+Pfister Group has always emphasized respect and fairness alongside with technical excellence and innovation. We value our employees as our most valuable resource. This policy reinforces the values of the Angst+Pfister Group, our Code of Conduct as well as our long-term strategic goals. We work with business partners who share our commitment to Human Rights, ethics and compliance. We clearly communicate...

mcDSA E4 optionen
mcDSA E4 optionen
10/01/2011 - www.angst-pfister.com
mcDSA-E4 Motion Control · · · · · · · Very compact 4-quadrant controller to control brushtype, brushless DC-motors and linear motors Freely programmable with integral Motion Process Unit. Allows stand-alone operation and stand-alone networks CAN interface (DSP402) The controller has over-voltage, low-voltage and overtemperature monitoring With display "power", "status" and "error" The controller can be fixed by a hut-rail (35 mm) or fixing clips Three connection plugs are included in delivery miControl Antriebsregler...

Datenblatt mcDSA F7
Datenblatt mcDSA F7
10/01/2011 - www.angst-pfister.com
mcDSA-F7 Motion Control · Very compact 4-quadrant controller to control brush-type, brushless DC-motors and linear motors miControl Antriebsregler · Sehr kompakter 4-Quadranten-Regler zur Ansteuerung von bürstenlosen, bürstenbehafteten DC-Motoren und Linearmotoren ® Pin assignment / Pinbelegung - ACHTUNG! Alle reservierten Klemmen dürfen nicht angeschlossen werden X1.32 X1.30 X1.28 X1.26 X1.24 X1.22 X1.20 X1.18 X1.16 X1.14 X1.12 X1.10 X1.8 X1.6 X1.4 X1.2 X2.16 X2.14 -AIN 1 +AIN 1 RES RES...
 


28/09/2024 - www.vescom.com
Résumé en cours de création pour ce fichier PDF

00.. <nOŒ - Hussor Erecta
00.. <nOŒ - Hussor Erecta
21/11/2017 - www.hussor-erecta.fr

Communiqué de presse : stratégie d'innovation
Communiqué de presse : stratégie d'innovation
27/10/2016 - www.lafarge.fr
Communiqué de Presse Paris, le 29 septembre 2010 Euronext Paris : LG LAFARGE ACCELERE SA STRATEGIE D INNOVATION AETHER, PROJET VISANT A REDUIRE L EMPREINTE CO2 DU CIMENT, REÇOIT LE SOUTIEN FINANCIER DE L UNION EUROPEENNE Le projet Aether, une innovation développée par Lafarge pour réduire l empreinte CO2 du ciment, vient de recevoir le soutien de l Union européenne pour son développement. Ce soutien s inscrit dans le cadre du programme européen « LIFE + », un instrument de financement...


28/09/2024 - www.vescom.com
Résumé en cours de création pour ce fichier PDF

Fiche Technique   Romy
Fiche Technique Romy
23/08/2024 - www.turbofonte.com
Poêle à bois ROMY Puissance nominale : 4 kW Puissance nominale : 7 kW Rendement : 77,3 % Rendement : 77,8 % CO à 13% d'O2 : 1 374 mg/Nm3 CO à 13% d'O2 : 999 mg/Nm3 Température des fumées : 238°C Température des fumées : 313°C Poussières : 26 mg/Nm3 Poussières : 32 mg/Nm3 NOx : 102,7 mg/Nm3 NOx : 73 mg/Nm3 3 COV : 115,9 mg/Nm COV : 101,9 mg/Nm3 Classe énergétique : A Classe énergétique : A Rendement saisonnier (ETAS) : 68,3 % Rendement saisonnier (ETAS) : 68,8 % Indice...

La véranda Kajole reçoit l'homologation du CSTB
La véranda Kajole reçoit l'homologation du CSTB
12/09/2018 - www.andresudrie.com
la VERANDA AA1485 KAJOLE à ossature aluminium - inertie au dessus reçoit l homologation du CSTB Le système de toiture de vérandas à ossature aluminium AA1485 KAJOLE de KAWNEER est l un des rares à avoir passé avec succès l homologation délivrée par le CSTB, Centre Scientifique et Technique du Bâtiment. Cette homologation atteste de la capacité de KAWNEER à proposer la réalisation de vérandas conformes à la fois aux « Règles Professionnelles Vérandas » du SNFA - Syndicat National...